Main Features:
Model: DK600 600Wx1CH
Output circuitry:Class D
Output power(RMS,≤1% THD + N@0.5 ohms):NA
Output power(RMS,≤1% THD + N@1 ohms):NA
Output power(RMS,≤1% THD + N@2 ohms):600W
Output power(RMS,≤1% THD + N@4 ohms):400W
Signal-to-noise (@ 1W): >90dB
Maximum power:600W
Signal Inputs:RCA
Distortion (SMPTE-IM):NA
Amplifier Protection:YES
Input Sensitivity :0.2V-5V
Dimensions (L x W x H):184x140x54mm
TEST REPORT:
Features:
600W RMS Class-D amplifier.
2 ohm load stable.
Double Side PCB and SMD components.
Adjustable Input level, LPF, Subsonic function.
Advanced short circuit, overload, over heat and over/low voltage protection.
Heavy duty terminals.
Optional remote controller.
3 Detailed specs:
3.1 Test Condition.
All the specs were tested with following condition unless noted.
1. Power supply: 14.4V DC power supply
2. Test signal: 80Hz sine wave.
3. Loads: Resistor dummy load.
4. Environment: 25 degree C, open air.
5. Relative humidity: 70%.
6. Instrument: Audio Precision SYS-2322A.
3.2 Output power performance
Following table is the RMS output power with THD+N(<22KHz) value at 5%, 3%, 2% and 1%.
Power
THD+N |
RMS power (2ohm) |
RMS power(4ohm) |
5% |
580W |
340W |
3% |
560W |
325W |
2% |
550W |
310W |
1% |
510W |
300W |
Table 1Output Power with THD+N
Following chat shows the output power with THD+N curve at 4ohm loads, and 2ohm loads.
Chart 1. RMS output power @4ohm with THD+N
Chart 2. RMS output power @2ohm with THD+N
3.3 Frequency Response
1. -3dB frequency response: 15Hz~225Hz.
2. -1dB frequency response: 20Hz~170Hz.

Chart 3, Frequency Response
3.4 LPF & Subsonic Filter features
- LPF adjustable from 50Hz~225Hz.
- Subsonic Filter adjustable from 15Hz~55Hz.

Chart 4.LPF response

Chart 5.Subsonic Filter response
3.5 Subsonic level (0db,6db,12db).
3.6 THD+N
THD+N=0.20% @ 50W output power with 4ohm load.
3.7 S/N Ratio
>75dB
3.8 Protection System
1. Overload:
Protect less than 1.33 Ohm loads at full-scale output power.
2. Short Circuit:
Full rated power short circuit protect test: passed.
Full rated power long last short circuit test: 10 minutes passed.
3. Over temperature:
Protect while inner temperature over 85 degree C.
4. Over/Low voltage:
Protect while power supply voltage over 16.5V or lower than 8.6V.
3.9 Idle current and Efficiency:
1. Idle current: 0.78A
2. Efficiency: 88% at THD+N=1% (4ohm)
3.10 Dimension
This amplifier’s size is at 140mmX185mmX54mm(W,L,H).